A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. Hirex Water Damage sends licensed technicians straight to your Marty address with extraction equipment already loaded and running.
Too many Marty, SD families have called a big national number only to get bounced through hold music before a random subcontractor shows up hours later, so Hirex Water Damage built its Marty operation differently. Every technician on our Marty roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Water Removal in Marty isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in Marty, SD, so you're protected from the moment our truck pulls into the driveway.
Because our equipment lives in a Marty, SD warehouse rather than out of state, we're not waiting on a supply run before we can start extraction.
Ask any Marty property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Marty call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Marty started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
If any of that sounds familiar, don't wait for it to get worse — call our Marty line and we'll tell you honestly whether it's a same-day emergency or something we can schedule.
Whether it's one bedroom carpet or an entire flooded commercial floor, our Marty crews scale the response to match the loss — nothing gets a cookie-cutter response.
Our Marty units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Our drying plans use moisture meters and thermal imaging to target air movers exactly where hidden moisture is trapped, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Marty homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
For commercial Marty accounts, we assign a project lead, run crews after normal hours to reduce downtime, and bring equipment sized to the actual footprint — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Marty crews are trained for exactly that protocol.
We apply antimicrobial treatment during every Marty drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
You get a written estimate before any equipment runs, not a mystery total handed to you after the fact.
Our Marty, SD warehouse keeps drying equipment close, which typically puts a Marty tech at your door inside an hour.
We photograph and log every step specifically so your claim moves faster and you're not the one arguing with the insurance company.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
A short call with our Marty dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
A licensed technician heads to your Marty address with extraction and drying equipment already loaded.
Extraction happens immediately, followed by a moisture survey that tells us precisely where the drying equipment needs to go.
We re-check moisture levels daily until materials hit dry standard, then hand you full documentation for your records or your insurer.
Our Marty technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
We put that guarantee directly on the Marty work order, not just in an ad. If a second visit is ever needed, it comes from the same crew that handled the original job whenever scheduling allows, since they already know the property and the readings we started from.
"Water heater blew at midnight and the Hirex Water Damage crew had extraction equipment running before 1am. Genuinely fast." — Danielle R.
"The team handled every conversation with my adjuster — I never had to explain what psychrometrics meant to anyone." — Marcus T.
"They showed me the daily moisture readings so I wasn't just trusting a stranger's word that the house was dry." — Priya S.
"A supply line failure flooded our kitchen and this crew had us reopened in under a week — much faster than we expected." — Aaron W.
"Sewage backup is not a fun call to make, but the crew treated it professionally and explained the whole containment process." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Because our equipment is staged inside Marty, SD, most Marty calls see a technician on-site within 60 to 90 minutes of the initial call.
Upfront, written pricing is standard on every Marty job, not an add-on option.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Marty properties.
Direct adjuster communication is standard — we send photo and moisture documentation formatted for a Marty insurance claim.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
Yes, our Marty crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
Turn off the water supply if you can reach it safely, keep people and pets out of the flooded area, and don't run electrical devices near standing water.
Commercial response is a regular part of our Marty work — restaurants, offices, and multi-unit buildings included.
Drying time varies with material and how quickly extraction started, but 3 to 5 days is typical for most Marty jobs.
Mold isn't inevitable, but the window to prevent it is narrow, which is why we treat speed as part of the Marty service, not an upsell.
Our Marty guarantee covers a 30-day callback window — if moisture shows up again from the same loss, we come back free of charge.
We cover Marty and the surrounding zip codes listed below, plus neighboring communities throughout Marty, SD.
Marty is our home base, and our reach extends across Marty, SD through a network of staged equipment and on-call technicians. If your address falls inside or near Marty, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Marty, Marty, SDReach our Marty line directly and get a technician on the way today.
Call +1-844-578-1604